AFTER SALES SUPPORT
1300 777 137
11
MODEL: IA0955 PRODUCT CODE: 55166 10/2016
Instructions
Operating the Super Blend 1000
1. Place the power base on a flat, stable and level surface.
2. Add the ingredients into the nominated blending cup.
NOTE: Do not exceed the maximum fill mark on the blending cup when adding ingredients,
as this could cause spillage.
3. Pour in a small amount of liquid into the blending cup, this will assist to blend the
ingredients.
4. Twist the blade attachment onto the blending cup by turning it in a clockwise direction until
it is securely attached. The blending blades should be clearly visible inside the blending cup.
CAUTION: Always ensure that the blade attachment is tightly and securely fastened to the
blending cup before using the Super Blend 1000. A medium to high amount of force should
be used to fasten the blade attachment onto the blending cup.
5. Plug the power cord into a power outlet and turn on.
6. Turn the blending cup upside down so the blade attachment is positioned on the bottom of
the blending cup.
7. Press the blending cup down and twist it in a clockwise direction to lock it into position.
Once locked, the Super Blend 1000 will commence blending automatically. When you
have reached the desired consistency, twist the blending cup in an anticlockwise direction
and wait 3 seconds. Then lift the blending cup from the power base.
NOTE: The Super Blend 1000 is designed to be used for a maximum of 1 minute intervals.
Please allow for a 3 minute cool down period in between each 1 minute cycle to ensure the
Super Blend does not overheat.
8. Switch off and unplug the Super Blend 1000 from the power outlet.
9. Turn the blending cup upright with the blade attachment on top. Remove the blade
attachment by rotating it in an anticlockwise direction and replace it with an easy-drink or
storage lid.
