11
After Sales Support
1300 663 907
Model Number
DKE2200
Open the lid by pressing lid release
button on the handle. The lid will lift
upwards.
Place the kettle onto the power
base and plug the cord into a power
socket and switch on. The base will
beep four times.
Select the desired setting by
pressing one of the five temperature
buttons. The selected button will
illuminate and beep once.
Fill with desired amount of water.
The amount of water must always
be between the minimum and
maximum indicators.
Remove the kettle jug from the power base.
Ensure the lid is closed by pushing it down until it locks in place.
1.
4.
2.
5.
6.
3.
Position the Digital Kettle on a firm level table or bench.
Instructions
NOTE: You can change the selected temperature by pressing any of the other settings
during heating. If you press the selected temperature button again, this will turn the
kettle off.
