Kubota ZD326, Operator'S Manual

Page: 81 / 109

61 PERIODIC SERVICE
ENGLISH
EVERY 200 HOURS
B
Changing Engine Oil
To avoid serious injury or death:
A
Be sure to stop the engine and remove the key
before changing the oil.
A Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. To change the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely. The
used oil can be drained out more easily if the engine is
warm.
2. Fill with the new oil up to the upper notch on the
dipstick.
3. To check the oil level. Remove the dipstick, wipe it
clean, insert it and draw it out again. Check to see that
the oil level is between the 2 marks.
B Replacing Engine Oil Filter
To avoid serious injury or death:
A
Be sure to stop the engine and remove the key
before changing the oil and the oil filter.
A
Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
A
Be sure to reinstall the removed cover after
changing the oil and the oil filter.
1. The oil filter must be changed every 200 service hours.
2. Loosen the nuts and remove the cover.
3. Remove the oil filter.
A To prevent serious damage to the engine,
replacement element of the recommended type must
be used. Use only a genuine KUBOTA filter or its
equivalent.
(1) Drain plug
(1) Cover
(2) Nut
(1) Engine oil filter