Kubota Z724X, Operator'S Manual

Page: 65 / 96

PERIODIC SERVICE 48
ENGLISH
B Checking Air Cleaner Outer Element
Check the air cleaner daily or before starting the engine.
Check for a buildup of dirt and debris around the air
cleaner system. Keep this area clean. Also check for
loose or damaged components.
Check the air cleaner outer element every 100 hours of
operation.
A
Operating the engine with loose or damaged air
cleaner components could allow unfiltered air into the
engine causing premature wear and failure.
[Air Cleaner Components]
1. Unhook retaining clips and remove end caps.
2. Check inlet screen and clean if necessary.
3. Remove and check outer element. Replace if dirty.
4. If replacing outer element, remove and check inner
element. Replace inner element if dirty.
5. Check all parts for wear, cracks, or damage, and that
ejector area is clean.
6. After checking parts, reassemble the air cleaner.
When installing the end cap, make sure the alignment
arrow on the end cap and the alignment arrow on the
air cleaner housing are aligned, showing correct
installation.
7. Reinstall end caps with ejector area down with
retaining clips.
A
Outer element cannot be cleaned with compressed
air.
(1) Air cleaner
(1) Air cleaner housing
(2) End cap
(3) Rubber vent / Ejector area (4) Outer element
(5) Inner element
(6) Rain cap
(1) Air cleaner housing
(2) End cap
(3) Retaining clips
(4) Alignment arrow