Kubota WSM L3560, Workshop Manual

Page: 449 / 801

TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-S130
(5) GST Clutch
Clutch Disc Wear
1. Measure the thickness of GST clutch disc with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
9Y1210824TRS0149US0
Steel Plate Wear
1. Measure the thickness of GST steel plate with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
9Y1210824TRS0150US0
Flatness of Piston and Steel Plate
1. Place the part on a surface plate.
2. Check it unable to insert a feeler gauge (allowable limit size)
underneath it at least four points.
3. If the gauge can be inserted, replace it.
9Y1210824TRS0151US0
Piston Return Spring Free Length
1. Measure the free length of spring with vernier calipers.
2. If the measurement is less than the allowable limit, replace it.
9Y1210824TRS0152US0
Thickness of GST clutch
disc
Factory specification
2.55 to 2.65 mm
0.101 to 0.104 in.
Allowable limit
2.50 mm
0.0984 in.
Thickness of GST steel
plate
Factory specification
1.55 to 1.65 mm
0.0611 to 0.0649 in.
Allowable limit
1.50 mm
0.0591 in.
Flatness of GST piston Allowable limit
0.15 mm
0.0059 in.
Flatness of GST steel
plate
Allowable limit
0.30 mm
0.012 in.
Piston return spring free
length
Factory specification
19.9 to 20.1 mm
0.784 to 0.791 in.
Allowable limit
18.0 mm
0.709 in.
KiSC issued 03, 2016 A