SAFETY PRECAUTIONS - continued
OM 0297SB-AU
6
Subframe & Snowblower Operation
1.
Before leaving the tractor/snowblower
unattended, take all possible precautions.
Park the tractor/snowblower on level ground,
place the transmission in neutral, set the
parking brake, disengage the PTO, lower the
snowblower to the ground, place all levers
including auxiliary control levers in neutral,
shut off the engine and remove the ignition
key.
2.
Before starting the tractor/ snowblower,
remove the ice that might have accumulated
on the auger/fan, inspect and clean every
rotating part.
3.
Prior to operation, clear work area of all
objects that can be picked up and thrown.
Mark all curbs, pipes, etc. that cannot be
moved.
4.
Be sure the PTO switch/lever is in
OFF/disengaged position before starting
engine.
5.
Exercise extreme caution when operating on
or crossing a gravel drive, walks, or roads.
Stay alert for hidden hazards or traffic.
6.
Do not carry passengers.
7.
Keep clear of all rotating parts. Do not put
hands or feet under, or into snowblower and
subframe with engine running. Be especially
observant of the snowblower areas of
discharge, intake or all other mechanical
motions.
8.
For your safety, do not work under any
hydraulically supported machine elements
that may creep down, suddenly drop or be
accidentally lowered.
9.
Park the tractor/snowblower on level ground,
place the transmission in neutral, set the
parking brake, disengage the PTO, lower the
snowblower to the ground, place all control
levers in neutral, shut off the engine, remove
the ignition key and allow the rotating parts to
stop BEFORE unclogging the housing or the
chute and making any repairs, adjustments or
inspections. Use only a 36" long stick of wood
to unclog the snowblower.
10.
If the snowblower starts to vibrate abnormally,
disengage the PTO, stop the engine
immediately and check for cause. Excessive
vibration is generally a sign of trouble.
11.
Do not run the engine indoors except when
starting engine and transporting attachment in
or out of building. Carbon monoxide gas is
colorless, odorless and deadly.
12.
Do not attempt to operate on steep slopes. If
operating on slopes is necessary, exercise
extreme caution when changing direction.
13.
Never operate snowblower without guards,
and other safety protective devices in place.
All tractor and snowblower shields and covers
must be correctly installed at all times. When
necessary to remove these, they must be
reinstalled immediately.
14.
Never operate snowblower near glass
enclosures, automobiles, window wells,
embankments, etc., without proper adjustment
of snow discharge angle.
15.
Never operate machine at high transport
speeds on a slippery surface.
16.
Use extra caution when backing up.
17.
Disengage power to auger/fan when
transporting or when not in use.
18.
Never operate the snowblower without good
visibility and lighting.
19.
Prolonged exposure to loud noise can cause
impairment or loss of hearing. Wear a suitable
hearing protective device such as earmuffs or
earplugs to protect against objectionable or
uncomfortable noises.
20.
Never allow anyone near the work area.
21.
Never allow anyone to operate the
snowblower until they have read the manual
completely and are thoroughly familiar with
basic tractor and snowblower operation.
Summary of Contents for T1460
