background image

RECOMMENDED OILS

RECOMMENDED OILS, GREASES, AND FUELS

IMPORTANT :

• Before delivery the hydraulic oil is Idemitsu Daphne Super Hydro 46ST.
• Use the engine oil API service classification CJ-4.
• Use SAE 90 (API, GL-4, GL-5) as the drive-unit-oil for all seasons.

Application

Viscosity

Shell

ExxonMobil

MIL-Standard

Engine oil

In winter or by low
temperatures

SAE 10W

Shell Rotella T10W
Shell Rimula 10W

MIL-L-2104C
MIL-L-2104D

SAE 20W

Shell Rotella T20W-2
Shell Rimula 20W-2

In summer or by high
ambient tempera-
tures

SAE 30

Shell Rotella T30
Shell Rimula 30

SAE 40

Shell Rotella T40
Shell Rimula 40

SAE 50

Shell Rimula 50

All-Season engine oil Multi-purpose Shell Rotella T15W-40

Gear oil

In winter or by low
temperatures

SAE 75

 

Mobilube HD Plus 80W-90

MIL-L-2105C

Shell Oil S8643

SAE 80

 

MIL-L-2105C

Shell Spirax HD80W

In summer or by high
ambient tempera-
tures

SAE 90

 

MIL-L-2105

Shell Spirax HD90

MIL-L-2105C

SAE 140

 

MIL-L-2105C

Shell Spirax HD140

All-Season gear oil

Multi-purpose

Shell Spirax HD80W
Shell Spirax HD85W

MIL-L-2105C

Hydraulic
oil

In winter or by low
temperatures

ISO 32

Shell Tellus S2M32

Mobil DTE 10 Excel 32

ISO 46

Shell Tellus S2M46

In summer or by high
ambient tempera-
tures

ISO 68

Shell Tellus S2M68

Mobil DTE 10 Excel 46

Grease

Shell Alvania EP2

Mobilux EP2

Fuel

Light oil No. 2-D (ASTM D975)

Fuel under 5 

Light oil No. 1-D (ASTM D975)

NOTE :

• Engine oil

– Use  the  engine  oil  of  suitable  American-petroleum-institute  (API)  service  classification  and  with

proper SAE Engine oil standards according to the ambient temperatures.

Above 25 

SAE 30 or SAE 10W-30, SAE 15W-40

 to 25 

SAE 20 or SAE 10W-30, SAE 15W-40

Below 0 

 (32 

 )

SAE 10W or SAE 10W-30

– See the following table for the suitable API classification engine oil and the fuel.

RECOMMENDED OILS, GREASES, AND FUELS

 RECOMMENDED OILS

SVL65-2

125

Summary of Contents for SVL65-2











































































































































Reviews: