Kubota RTV1140 CPX, Operator'S Manual

Page: 97 / 104

75 PERIODIC SERVICE
B
Replacing Slow-Blow Fuses
The slow-blow fuses are intended to protect the electrical
cabling. If any of them have blown out, be sure to pinpoint
the cause. Never use any substitute, use only a KUBOTA
genuine part.
C
Replacement procedure
1. Disconnect the negative cable of the battery.
2. Open the slow-blow fuse box cover.
3. Pull out the slow-blow fuse.
4. Insert a new slow-blow fuse into the slow-blow fuse
box.
5. Close the slow-blow fuse box cover.
6. Connect the negative battery cable.
B Replacing Light Bulb
1. Head lights
Take the bulb out of the light body and replace it with
a new one.
2. Other lights
Detach the lens and replace the bulb.
B
Checking Hydraulic Tank Suction Strainer
1. Make sure that the hydraulic tank is not damaged and
the oil does not leak out of the hydraulic tank.
2. Make sure that the water is not mixed with the oil.
3. When the suction strainer is dirty, wash it with the light
oil.
(1) Fuse box cover
(2) Slow-blow fuse box cover
Light Capacity
Head lights 37.5 W
Tail light 5 W
Brake light 21 W
Easy Checker(TM) 3.8 W (14V, 0.27A)
Turn signal light (front) 20 W (if equipped)
Turn signal light (rear) 21 W (if equipped)
Work light 27 W (if equipped)
Instrument panel light 3.8 W (14V, 0.27A)
(1) Hydraulic tank
(2) Suction strainer