Kubota RTV 900, Operator'S Manual, Page: 52 / 108

32 HYDRAULIC OUTLET
HYDRAULIC OUTLET
HYDRAULIC OUTLET
[if equipped]
B
Hydraulic Outlet Lever
To avoid personal injury:
A
Leaving the vehicle while the engine runs
requires shifting the range gear shift lever to
the "NEUTRAL" position, and locking the
parking brake lever firmly.
C Steps for operation
1. Check the outlet and return directions of the hydraulic
coupler and then connect the hydraulic hose.
2. Make sure that the hydraulic lever at the side of the
working vehicle is in the "NEUTRAL" position.
3. Shift the hydraulic outlet lever to the "ON" position
(detended).
4. Operate the hand throttle, to adjust oil volume for
implements.
5. Return the hydraulic outlet lever to the "OFF" position
after use, and lock it with the restricting plate.
A Do not hold the lever in the "PULL" or "PUSH" position
once the remote cylinder has reached the end of its
stroke, as this will cause oil to flow through the relief
valve. Forcing oil through the relief valve for extended
periods will overheat the oil.
A
Continuing to use the lever may cause oil temperature
to rise excessively. The use of oil at a high
temperature causes the seals to become damaged
and fail.
A
Shift the hydraulic outlet lever to the "OFF" position
and then stop the engine.
A
Because of the safety devices, the engine will not start
except when the hydraulic outlet lever is placed in the
"OFF" position and range gear shift lever is placed in
the "NEUTRAL" position.
(1) Hydraulic outlet lever (if equipped)
(2) Restricting plate (if equipped)
(3) Knob bolt (if equipped) (A) "ON" (Detent position)
(B) "OFF"
(1) Hydraulic outlet (if equipped)
Outlet
Return
Lever Push (ON) Pull (OFF)
Port
A In In
B Out In