Kubota ,RCK60B-23BX, Workshop Manual

Page: 232 / 436

5.1.14 Removing propeller shaft
(1) Front coupling
(2) Rear coupling (3) HST fan
1. Disconnect the front coupling (1) from the engine.
2. Remove the propeller shaft assembly.
3. Remove the HST fan (3) from the propeller shaft.
(When reassembling)
• Apply grease to inside of the front coupling and the
rear coupling.
Tightening tor-
que
Front coupling
mounting bolt (M8)
24 to 27 N ⋅ m
2.4 to 2.8 kgf
⋅
m
18 to 20 lbf
⋅
ft
HST fan mounting
bolt (M8)
9.8 to 11 N
⋅
m
1.0 to 1.2 kgf ⋅ m
7.3 to 8.6 lbf
⋅
ft
5.1.15 Removing differential lock pedal
1. Remove the differential lock return spring (1).
(1) Spring
(2) Differential lock pedal
(3) Rue ring cotter (4) Differential lock rod
2. Remove the rue ring cotter (3).
3. Turn and remove the differential lock pedal (2).
5.1.16 Removing speed control pedal, HST
damper, and cruise rod
1. Remove the speed control pedal (1).
2. Remove the rue ring cotter (4).
3. Remove the HST dumper (2).
(1) Speed control pedal
(2) HST dumper
(3) HST pedal link (4) Rue ring cotter
4. Remove the cruise arm (6).
5. Remove the cruise rod (5).
6. Remove the spring pin then remove the release
arm (7) and cruise plate (9).
(5) Cruise rod
(6) Cruise arm
(7) Release arm (8) Cruise spring
(9) Cruise plate
(When reassembling)
• Be sure to assemble the cruise spring (8) properly.
4. TRANSAXLE
SERVICING
5. Disassembling and assembling
4-42
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A