Preparations on the field
69
General
The following work steps are described in this section:
•
•
•
Lowering the
machine
After road transport, the machine is brought into the work position on
the field.
Place the machine onto ground that is as flat as possible.
Shut off the engine, set the parking brake, remove the ignition key
and secure the tractor against rolling away..
Removing the tine
covers
Remove all of the tine covers.
Place the tine covers in the two holders on the left and right of the
main frame.
Secure the tine covers in the holder with safety splints.
\
WARNING
Firmly secure the accessories
Accessories not in use must always be stowed and secured in the
holders provided. When the machine is in motion, unsecured
accessories can come loose. Damage to the machine and serious
or fatal injury may be caused as a result.
Tine cover holder
