5
Cutting P
Effective Cut Pipe Length
Spigot
Whole Cut Pipe Length
Section 3 Operational Procedures
1. Cutting of Pipe
Step 1: Cut Pipe Length and Cutting Position
After deciding where to cut (how long cut pipe length is.), measure cut pipe length and mark
a cutting position. Cut pip length is effective length of cut pipe.
Fig.2
Example: NS Type Pipe
Step 2: Guide Ring Installation
Tip! The Guide Ring is a guide rail to keep the machine and the wheel stayed on track. Make
sure the Guide Ring is fixed tight and stable on the pipe for accurate cutting.
Fig.3
Guide Ring
392mm
(15 1/2 inch)
Cutting Position
A) Place the Guide Ring on the pipe 392mm (15 1/2”
Hex Socket Head Bolt
) away from a cutting position. The Guide
Ring Gauge is convenient to measure a Guide Ring position. (Fig.3 and Pict.1)
B) Tighten all hex socket head bolts evenly, keeping the Guide Ring at a right angle against the
pipe. (Pict.2)
C) Check at least 4 measurements (top, bottom and sideways) for a proper Guide Ring position.
