Kubota M7131, Operator'S Manual

Page: 267 / 298

235 PERIODIC SERVICE
B
Changing Front PTO Oil
(if equipped)
C
Cleaning oil filter
1. To drain the used oil, remove the drain and filling plug
at the front PTO case and drain the oil completely into
the oil pan.
2. After draining reinstall the drain plug.
3. Remove the internal retaining ring and loosen the M8
bolt to remove the cover.
4. Extract the oil filter from the pump unit and clean it.
5. Reassemble the removal parts.
6. Fill with the new oil up to the lower rim of filling plug
port. (See "LUBRICANTS" in "MAINTENANCE"
section.)
7. After filling reinstall the filling plug.
(1) Air conditioner belt
(2) Self-tension arm
(3) Square hole
(4) Square wrench
Oil capacity 2.7 L
(1) Drain plug
(2) Filling plug
(3) Internal retaining ring
(4) M8 bolt
(5) Pump unit