163
HYDRAULIC UNIT
[Premium, Premium KVT models]
Using the (+) and (-) switches, the setting can be
changed. (The setting is variable in the 30-100% range.)
Slide the slider to the right (increasing the value) to raise
the top limit of the 3-point hitch.
When the setting has reached 100%, the top limit control
is turned off.
For the setting procedure, refer to "Setting the 3-point
hitch" in "K-MONITOR" in "INTELLIPANEL(TM)
CONTROL" section.
B
3-Point Hitch Lowering Speed Adjustment
To avoid personal injury or death:
A
Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to 2 or more seconds.
Adjust to the lowering speed suited for the implement in
use.
[Standard model]
1. Turn the dial in the "FAST" direction, and the 3-point
hitch's lowering speed will increase.
2. Turn the dial in the "SLOW" direction, and the 3-point
hitch's lowering speed will decrease.
[Premium, Premium KVT models]
Using the (+) and (-) switches, the setting can be
changed.
The longer the bar graph is extended rightward, and the
3-point hitch's lowering speed will increase. The bar graph
extracted shorter leftward, and the 3-point hitch's lowering
speed will decrease.
For the setting procedure, refer to "Setting the 3-point
hitch" in "K-MONITOR" in "INTELLIPANEL(TM)
CONTROL" section.
(1) Lift arm top limit adjustment switch
(2) Lift arm top limit control
(3) Lift arm bottom limit control
(4) Lift arm height control, current position (height)
(1) 3-point hitch lowering
speed adjustment dial
"FAST"
"SLOW"
(1) 3-point hitch lowering speed control
(2) 3-point hitch lowering speed adjustment switch
Summary of Contents for M7131
