manualshive.com logo in svg

Kubota M7-132, Operator'S Manual

Share
Download
Kubota M7-132 Operator'S Manual Download Page 96

7. Setting the driveability

The differential lock, front wheel drive and front suspension settings can be made.

(1) Differential lock indicator
(2) Auto differential lock indicator
(3) 4WD indicator
(4) Auto 4WD indicator
(5) Front suspension (active) indicator

(6) Front suspension (auto) indicator
(7) Differential lock switch
(8) Auto differential lock switch
(9) 4WD switch
(10) Auto 4WD switch

(11) Front suspension (block) switch
(12) Front suspension (auto) switch
(13) Front suspension level meter

Setting the differential lock

1. Touch the left half of the differential lock switch (7), and the differential of the full-time front and rear wheels gets

locked. The indicator (1) lights up and stays on.

2. Turn off the switch (7), and the differential gets unlocked and the indicator (1) goes off.
3. Touch the left half of the auto differential lock switch (8), and the automatic differential, listed below, gets locked.

The indicator (2) lights up and stays on.

4. Turn off the switch (8), and the differential gets unlocked and the indicator (2) goes off.

Operating conditions of the automatic differential lock:

Travelling speed

Front wheel turning angle

4-wheel differential lock

Below 10 km/h (6.2 mph)

Approx. 15º or less

ON

*1

Approx. 15º or more

OFF

Between approximately 10 and 20 km/h (6.2
and 12.4 mph)

Approx. 10º or less

ON

*1

Approx. 10º or more

OFF

Above 20 km/h (12.4 mph)

---

OFF

 

*1

Step on one of the brake pedals, and the differential lock is released.

 

Setting the front wheel drive

1. Touch the left half of the 4WD switch (9), and the front and rear wheels are driven. The indicator (3) lights up and

stays on.

2. Turn off the switch (9), and the front-wheel drive is disabled and the indicator (3) goes off.
3. Touch the left half of the auto 4WD switch (10), and the automatic 4WD, listed below, gets activated. The indicator

(4) lights up and stays on.

4. Turn off the switch (10), and the 2WD is abled and the indicator (4) goes off.

INTELLIPANEL

™

 CONTROL

K-MONITOR MAIN MENU (

PREMIUM

 AND 

PREMIUM KVT

 MODEL ONLY)

90

M7132, M7152, M7172

Summary of Contents for M7-132













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands