Kubota M7-132, Operator'S Manual

Page: 292 / 332

(1) Drain plug
(2) Filling plug
(3) Internal retaining ring
(4) M8 bolt
(5) Pump unit
EVERY 1000 HOURS
1. Changing transmission fluid
WARNING
To avoid personal injury or death:
• Allow the engine to cool down sufficiently; oil
can be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the transmission case and drain the oil
completely into the oil pan.
2. After draining, reinstall the drain plug.
3. Fill with new oil up to the upper line of the sight
glass.
(See LUBRICANTS, FUEL AND COOLANT on
page 252.)
4. After running the engine for a few minutes, stop it
and wait for 10 minutes.
Check the oil level again, add oil to the prescribed
level.
Oil capacity
Power shift model: 85 L
CVT model: 80 L
(1) Drain plug
(1) Drain plug
(1) Filling plug
PERIODIC SERVICE EVERY 1000 HOURS
286
M7132, M7152, M7172