Kubota M7-132, Operator'S Manual

Page: 166 / 332

2. Press the bottom half of the 4WD switch, and the
manual 4WD mode is selected and the indicator on
the instrument panel lights up.
3. Return the 4WD switch to a central position, and
the 2WD mode is selected and the indicator goes
off.
(1) 4WD switch (A) AUTO 4WD mode
(B) Manual 4WD mode
(C) 2WD mode
For Premium, Premium KVT models:
1. Each time the 4WD button is pressed, the “Manual
4WD” and “2WD” modes switch. If the 4WD mode
is selected, the indicator on the instrument panel
lights up.
Switching to the
“AUTO 4WD” mode can be made
with the K-monitor.
(See Setting the driveability on page 90.)
(1) 4WD button (A) “PUSH”
NOTE :
• The 4WD button can be operated when the
tractor is on the go or at rest without
depressing the clutch.
(1) 4WD indicator
(2) AUTO 4WD indicator
(3) 4WD switch
(4) AUTO 4WD switch
8.3 4WD indicator
When the AUTO 4WD or manual 4WD mode is
selected, the indicator on the instrument panel lights
up.
(1) 4WD indicator
8.4 Front-wheel drive usage
Front-wheel drive is effective for the following jobs:
• When greater pulling force is needed, such as
working in a wet field, when pulling a trailer, or
when working with a front-end loader.
• When working in sandy soil.
• When working on hard soil where a rotary tiller
might push the tractor forward.
• For increased braking at reduced speed.
IMPORTANT :
• Tyres will wear quickly if the front-wheel drive is
engaged on paved roads.
OPERATING THE TRACTOR TRAVEL CONTROLS
160
M7132, M7152, M7172