Kubota M6-101-M6-111, Operator'S Manual

Page: 111 / 205

83 3-POINT HITCH & DRAWBAR
To avoid personal injury or death:
A
Be sure to stop the engine.
A Do not stand between tractor and implement
unless parking brake is applied.
A
Before attaching or detaching implement,
locate the tractor and implement on a firm level
surface.
A
Whenever an implement or other attachment is
connected to the tractor 3-point hitch, check
full range of operation for interference, binding
or PTO separation.
A
Do not exceed maximum allowable length of
either lifting rod, or the lifting rod will come
apart and the 3-point equipment may fall.
B
Remote Hitch UP / DOWN Switch
To avoid personal injury or death:
A
Do not use the Remote hitch up / down switch
when the implement is attached on the 3-point
hitch.
These switches are used to raise and lower the 3-point
hitch for aligning the arm with the implement only. Press
the "UP" switch and 3-point hitch goes up. Press the
"DOWN" switch and the 3-point hitch comes down.
Movement of the 3-point hitch stops when the switch is
released.
A If these switches are pushed, the 3-point hitch's
position lock is activated and 3-P. Lifting / Lowering
indicator starts flashing (2 or so flash every second). If
it flashing, press the 3-P. quick raise switch or 3-P.
quick lower switch to release the position lock. (The
indicator goes off or turns on.)
B
Lifting Rod (Left)
By turning the rod itself, the lifting rod varies its length.
When extending the rod, do not exceed the groove on the
rod thread.
2 . Attaching and detaching implements
(1) "UP" switch
(2) "DOWN" switch
(1) Lifting rod (A) "GROOVE"