Kubota M4N-071, Operator'S Manual

Page: 130 / 152

2. If the hoses and clamps are found to be worn or
damaged, replace or repair them at once.
M4N-071
(1) Hose (2) Hose clamps
M5N-091, M5N-111
(1) Hose (2) Hose clamps
M5N-091, M5N-111
(1) Hose (2) Hose clamps
M5N-091, M5N-111
(1) Hose (2) Hose clamps
9. Checking lift cylinder hose
1. Check to see that hoses and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Lift cylinder hoses
EVERY 600 HOURS
1. Adjusting front axle pivot
If the front axle pivot pin adjustment is incorrect, front
wheel vibration can occur, causing vibration in the
steering wheel.
Adjusting procedure
1. Loosen the lock nut and screw-in the adjusting
screw until seated.
2. Tighten the screw by an additional 1/6 turn.
PERIODIC SERVICE EVERY 500 HOURS
124
M4N-071, M5N-091, M5N-111