OPERATING THE TRACTOR
28
B
Fuel Gauge
When the key switch is on, the fuel gauge indicates the
fuel level.
Be careful not to empty the fuel tank. Otherwise air may
enter the fuel system.
Should this happen, the system should be bled. (See
"Bleeding Fuel System" in "SERVICE AS REQUIRED" in
"PERIODIC SERVICE" section.)
B
Coolant Temperature Gauge
To avoid personal injury or death:
A
Do not remove radiator cap until coolant
temperature is well below its boiling point.
Then loosen cap slightly to the stop to relieve
any pressure before removing cap completely.
1. With the key switch at "ON", this gauge indicates the
temperature of the coolant. "C" for "cold" and "H" for
"hot."
2. If the indicator reaches the "H" position (red zone),
engine coolant is overheated. Check the tractor by
referring to "TROUBLESHOOTING" section.
B
Tachometer
The tachometer indicates the engine speed on the dial.
(1) Fuel gauge
(A) "FULL"
(B) "EMPTY"
(1) Coolant temperature gauge
(1) Engine revolution
Summary of Contents for M108DC
