9
ASSEMBLY INSTRUCTIONS
4. Assemble the specified parts as shown in the following
figure.
A
With the upper and lower front guards fitted together,
tighten the hex nuts so that the guards swivel smoothly
but the upper front guard does not move by gravity.
5. Assemble the specified parts as shown in the following
figure.
A
Before moving the tractor or the front loader, make
sure the front guards are tightly locked.
C
How to open the upper front guard
1. Lower the boom to the ground with the bucket in level
position.
2. Pull the front guard lever and open the upper front
guard.
A
Lower the front loader to the ground before opening
the upper front guard.
A
Do not raise the boom while the upper front guard is
opened.
(1) 4-M20 hex. nuts
(A) 12 to 13 mm
(0.47 to 0.51 in.)
(1) Front guard lever
(2) Front guard spring
(3) Snap pin
(1) Front guard lever
(A) "Lock position"
(B) "Unlock position"
(1) Front guard lever
(2) Upper front guard
(A) "Unlock"
(B) "Open"
