78
HYDRAULIC UNIT
HYDRAULIC UNIT
A
Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A
If noises are heard when implement is lifting after the
hydraulic control lever has been activated, the
hydraulic mechanism is not adjusted properly. Unless
corrected, the unit will be damaged. Contact your
KUBOTA Dealer for adjustment.
3-POINT HITCH CONTROL SYSTEM
To avoid personal injury or death:
A
Before using the 3-point hitch controls, ensure
that no person or object is in the area of the
implement or 3-point hitch. Do not stand on or
near the implement or between the implement
and tractor when operating the 3-point hitch
controls.
B
Position Control
This will control the working depth of 3-point implements
regardless of the amount of pull required.
C
Restricting Plate
When installing the backhoe, lower the position control
lever and place the lift arms in lowest position.
Lock the position control lever in lowest position with
restricting plate.
(1) Position control lever
(A) "UP"
(B) "DOWN"
(C) "FLOAT"
(1) Position control lever
(2) Restricting plate
(3) Lift arm
(A) "DOWN"
Summary of Contents for L47TL
