Kubota L3240, Operator'S Manual

Page: 103 / 157

81 MAINTENANCE
A
Engine Oil:
A
Oil used in the engine should have an American Petroleum Institute (API) service classification and Proper SAE
Engine Oil according to the ambient temperatures as shown above:
A With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
sulfur fuel on on-road vehicle engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable to
employ the "CF or better" lubricating oil with a high Total Base Number (TBN).
If the "CF-4, CG-4, CH-4 or CI-4"
lubricating oil is used with a high-sulfur fuel, change the lubricating oil at shorter intervals. (approximately
half)
A
Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
: Recommendable X : Not Recommendable
A Transmission oil:
The oil used to lubricate the transmission is also used as hydraulic fluid. To insure proper operation of the hydraulic
system and to complete lubrication of the transmission, it is important that a multi-grade transmission fluid is used in
this system. We recommend the use of
KUBOTA UDT or SUPER UDT fluid for optimum protection and performance.
(Consult your local KUBOTA Dealer for further detail.)
Do not mix different brands together.
A
Indicated capacities of water and oil are manufacturer's estimate.
Lubricating oil class
Fuel
Remark
Low-sulfur High-sulfur
CF TBN 10
CF-4 X
CG-4 X
CH-4 X
CI-4 X
: Class CF-4, CG-4 and CH-4 engine oils cannot be used on EGR (Exhaust Gas Re-circulation) type engines.
A
The CJ-4 engine oil is intended for DPF (Diesel Particulate Filter) type engines, and cannot be used on this tractor.