SAFE OPERATION
-
2
ENGLISH
CHECK BEFORE OPERATION & STARTING THE ENGINE
A
Always turn off the circuit breaker and all switches for the electrical
devices before starting the generator.
A
Check the wiring and connections of the electrical devices before
starting the generator.
A
Be sure to check the engine before operation. If something is wrong
with the engine, repair it immediately and before operation.
A
Keep all guards and shields in place before operating the generator.
Replace any that are damaged or missing.
A
Check to see that bystanders are at a safe distance from the
generator before starting.
A
Always keep the generator at least 1 m (3 ft.) away from buildings and
other facilities.
A
DO NOT allow children or livestock to approach the generator while
the engine is running.
A
DO NOT start the engine by shorting across starter terminals or
bypassing normal starting circuit. The generator may start
unexpectedly causing electric shock to others.
HANDLING ELECTRICAL COMPONENTS
Always exercise extra caution when handling electrical equipment.
Careless handling of electrical components can cause serious personal
injury, death by electrocution or property damage.
A
DO NOT touch the electrical system during operation.
A
Connect or disconnect the load to the AC receptacles or terminals
only when the engine is stopped.
A
Make certain that all power cables and wiring are in good condition.
Bare wire or frayed insulation can cause dangerous electrical shock,
burns or death.
A
DO NOT use or store the generator in damp or wet conditions.
Handling terminals and cables with wet hands can result in personal
injury or death.
A
Always shut the engine off and allow to cool before cleaning. Use
water sparingly when cleaning the outside of the generator. Make
sure that water does not splash onto the electrical system or into the
generator.
A
DO NOT touch the generator with wet hands. You may get an electric
shock that can cause burns or death.
A
DO NOT connect this generator to any building's electrical system
unless an isolation switch has been installed by a licensed electrician.
A
DO NOT run other generators in parallel.
Summary of Contents for GL11000-CAN
