Kubota DMC 8028 Operator'S Manual Download Page 161

Page: 161 / 219

Maintenance

161

Bolts on the

transmission

85xx model only

After 10 working hours

Thereafter, every season

→

»Maintenance intervals« page 104



Use a torque wrench and adjust it to the torque shown.



Check all the bolts on the transmission.

If the bolts are loose:



Tighten the bolt to the given torque.

WARNING

Safety concerning maintenance work on the transmission

When working on the transmission the tractor must be stopped
and secured.
This prevents the machine from suddenly starting to rotate.
Failure to observe the safety instructions may result in serious
injuries.

When working on the transmission:

•

The tractor's PTO must be disconnected.

•

The tool must be lowered to the ground.

•

The tractor engine must be stopped.

•

The ignition key must be removed.

•

The hand brake must be activated.

•

The tractor should be prevented from rolling.

Failure to secure the tractor to prevent it from rolling could
endanger lives.

81 Nm / 58 ft/lb

Summary of Contents for DMC 8028




























































































































































































































Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands

Kubota DMC 8028, Operator'S Manual

Search results

Summary of Contents for DMC 8028

Reviews:

Related manuals for DMC 8028

Brands by name

Popular brands