Kubota CTL SVL97-2, Operator'S Manual

Page: 44 / 158

10. AUX port switch [standard flow
model]
The AUX-port-switch is used to enable the AUX port.
The AUX-port-switch can be used only when the AUX-
port-variable-switch on the right-control-lever is in the
neutral position.
1. When pressing the AUX-port-switch once, the AUX
port is unlocked and the mark on the instrument
panel lights up.
2. When pressing the AUX-port-switch again, the AUX
port then gets locked and the mark on the
instrument panel lights off.
(1) AUX port switch
11. AUX port switch [High-Flow
model]
The AUX-port-switch is used to enable the AUX port.
The AUX-port-switch can be used only when the AUX-
port-variable-switch on the right-control-lever is in the
neutral position.
(See Auxiliary port operation [high-flow model only] on
page 70)
1. When pressing the AUX-port-switch once, the AUX
port is unlocked and the mark on the instrument
panel lights up.
2. When pressing the AUX-port-switch again, the AUX
port then gets locked and the mark on the
instrument panel lights off.
(1) AUX port switch
12. AUX port variable switch
With the AUX port unlocked, the flow rate of the
hydraulic oil varies depending on the tilt angle of the
AUX-port-variable-switch.
• Right-hand control
The flow rate of the hydraulic oil through the right-
hand port (male) varies.
• Left-hand control
The flow rate through the left-hand port (female)
varies.
(1) AUX port variable switch
INSTRUMENT PANEL AND SWITCH SWITCHES
38
SVL97-2