Kubota BX1880, Operator'S Manual

Page: 104 / 114

IMPORTANT :
• When the fuel line is disconnected for
maintenance or repair, plug both ends of the
fuel line with a clean plug of suitable size to
prevent dust and dirt from entering. You must
take particular care of the fuel lines in order to
avoid dust and dirt getting into the fuel system.
Entrance of dust and dirt causes malfunction of
the fuel pump.
The fuel line is made of rubber and ages regardless of
service period.
1. Inspect the fuel lines.
See the following figures.
2. After inspection, if the fuel lines and clamps are
found damaged or deteriorated, replace them.
See the following figures.
3. Check the fuel filter. If the fuel filter is clogged by
debris or contaminated by water, replace it.
(1) Pipe clamps
(2) Fuel line
(3) Fuel filter (4) Fuel pump
NOTE :
• If the fuel line is removed, be sure to properly
bleed the fuel system.
(See Bleeding the fuel system on page 100)
5. Checking the engine breather
hose
• Consult your local KUBOTA Dealer for checking the
engine breather hose.
SERVICE EVERY 4 YEARS
1. Replacing the radiator hose (water
pipes)
See Bleeding the fuel system on page 100.
1. Replace the radiator hoses and tighten the hose
clamps securely.
(1) Radiator hoses (2 pcs) (2) Hose clamps (4 pcs)
2. Replacing the fuel hose
• Consult your local KUBOTA Dealer for replacing the
fuel hose.
3. Replacing the power steering
hose
• Consult your local KUBOTA Dealer for replacing the
power-steering-hose.
4. Replacing the intake air line
• Consult your local KUBOTA Dealer for replacing the
intake-air-line.
5. Replacing the engine breather
hose
• Consult your local KUBOTA Dealer for replacing the
engine breather hose.
SERVICE AS REQUIRED
1. Bleeding the fuel system
Air must be removed:
PERIODIC SERVICE SERVICE EVERY 1 YEAR
100
BX1880,BX2380,BX2680