35
HYDRAULIC UNIT
HYDRAULIC UNIT
3-POINT HITCH CONTROL SYSTEM
To avoid personal injury:
A
Before using the 3-point hitch controls, ensure
that no person or object is in the area of the
implement or 3-point hitch. Do not stand on or
near the implement or between the implement
and tractor when operating the 3-point hitch
controls.
B
Hydraulic Control
Operating the hydraulic control lever actuates the
hydraulic lift arm, which controls the height of 3-point hitch
mounted implement.
To lower implement, push the lever forward; to raise it, pull
the lever back. After setting the implement to the desired
height, move the lever back to "NEUTRAL" position.
A
If the 3-point hitch can not be raised by setting the
hydraulic control lever to the UP position after long
term storage or when changing the transmission oil,
follow these air bleeding procedures.
1. Stop the engine.
2. Set the hydraulic control lever to the down position,
fully depress and hold the clutch pedal, start the
engine.
3. Operate the engine at low idle speed and continue
to depress the clutch pedal for at least 30 seconds
to bleed air from the system.
A
Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A
If noises are heard when implement is lifting after the
hydraulic control lever has been activated, the
hydraulic mechanism is not adjusted properly.
Unless corrected, the unit will be damaged.
Contact your KUBOTA Dealer for adjustment.
B
Implement Lowering Limit
The implement lowering limit can be changed by shifting
the locker (A).
Lower Limit
The lower limit can be changed by adjusting the
position of locker (A). Shifting the locker (A) forward
raises the lower limit and shifting it backward lowers
the lower limit.
(1) Hydraulic control lever
(A) "DOWN"
(N) "NEUTRAL"
(B) "UP"
(1) Interlock rod
(2) Locker (A)
