background image

Important Safety Information

4/5/19

4

Avoid Silica Dust

There are guidelines which should 
be followed if crystalline silica 
(quartz) is present in the dust.

Be aware of and follow OSHA (or 
other local, State, or Federal) 
guidelines for exposure to airborne 
crystalline silica.

Know the work operations where 
exposure to crystalline silica may 
occur.

Participate in air monitoring or 
training programs offered by the 
employer.

Be aware of and use optional 
equipment controls such as water 
sprays, local exhaust ventilation, 
and enclosed cabs with positive 
pressure air conditioning if the 
machine has such equipment. 
Otherwise respirators shall be 
worn.

Where respirators are required, 
wear a respirator approved for 
protection against crystalline silica 
containing dust. Do not alter 
respirator in any way. Workers who 
use tight-fitting respirators can not 

have beards/mustaches which 
interfere with the respirator seal to 
the face.

If possible, change into disposable 
or washable work clothes at the 
work site; shower and change into 
clean clothing before leaving the 
work site.

Do not eat, drink, use tobacco 
products, or apply cosmetics in 
areas where there is dust 
containing crystalline silica. 

Store food, drink, and personal 
belongings away from the work 
area.

Wash hands and face before 
eating, drinking, smoking, or 
applying cosmetics after leaving the 
exposure area.

Handle 
Chemicals Properly

Protective clothing should be 
worn.

Handle all chemicals with care. 

Follow instructions on container 
label.

Agricultural chemicals can be 
dangerous. Improper use can 
seriously injure persons, animals, 
plants, soil, and property. 

Inhaling smoke from any type of 
chemical fire is a serious health 
hazard.

Store or dispose of unused 
chemicals as specified by the 
chemical manufacturer.

Listed below are common practices that may or may not be applicable to the products 
described in this manual.

Summary of Contents for AP-SH35























Reviews:

Related manuals for AP-SH35