background image

Important Safety Information

4/9/19

4

OFF

REMOVE

Skid Steer Shutdown 
And Storage

Reduce engine speed and shut-off 
all power to the attachment. 

Park on solid, level ground and 
lower attachment until it is flat on 
the ground or support blocks. 

Turn off engine, and remove 
switch key to prevent unauthorized 
starting.

Relieve all hydraulic pressures. 

If included, raise seat bar and 
move controls until both lock. 

Wait for all components to stop 
before leaving operator’s seat.

Use steps, grab-handles and 
anti-slip surfaces when stepping 
on and off the skid steer.

Detach and store attachment in an 
area where children normally do 
not play. Secure attachment by 
using blocks and supports.

Tractor Shutdown & Storage

Reduce engine speed and shut-off 
all power to the attachment. 

Park on solid, level ground and 
lower attachment to ground or 
onto support blocks.

Put tractor in park or set park 
brake, turn off engine, and remove 
switch key to prevent unauthorized 
starting.

Relieve all hydraulic pressures. 

Wait for all components to stop 
before leaving operator’s seat.

Use steps, grab-handles and 
anti-slip surfaces when stepping 
on and off the tractor.

Detach and store implement in an 
area where children normally do 
not play. Secure implement using 
blocks and supports.

Handle 
Chemicals Properly

Protective clothing should be 
worn.

Handle all chemicals with care. 

Follow instructions on container 
label.

Agricultural chemicals can be 
dangerous. Improper use can 
seriously injure persons, animals, 
plants, soil, and property. 

Inhaling smoke from any type of 
chemical fire is a serious health 
hazard.

Store or dispose of unused 
chemicals as specified by the 
chemical manufacturer.

OFF

REMOVE

Avoid Silica Dust

There are guidelines which should 
be followed if crystalline silica 
(quartz) is present in the dust.

Be aware of and follow OSHA (or 
other local, State, or Federal) 
guidelines for exposure to airborne 
crystalline silica.

Know the work operations where 
exposure to crystalline silica may 
occur.

Participate in air monitoring or 
training programs offered by the 
employer.

Be aware of and use optional 
equipment controls such as water 
sprays, local exhaust ventilation, 
and enclosed cabs with positive 
pressure air conditioning if the 
machine has such equipment. 
Otherwise respirators shall be 
worn.

Where respirators are required, 
wear a respirator approved for 
protection against crystalline silica 
containing dust. Do not alter 
respirator in any way. Workers who 
use tight-fitting respirators can not 

have beards/mustaches which 
interfere with the respirator seal to 
the face.

If possible, change into disposable 
or washable work clothes at the 
work site; shower and change into 
clean clothing before leaving the 
work site.

Do not eat, drink, use tobacco 
products, or apply cosmetics in 
areas where there is dust 
containing crystalline silica. 

Store food, drink, and personal 
belongings away from the work 
area.

Wash hands and face before 
eating, drinking, smoking, or 
applying cosmetics after leaving the 
exposure area.

These are common practices that may or may not be applicable to the products described in 
this manual.

Summary of Contents for AP-SG2572





























Reviews: