KTR Kupplungstechnik
GmbH
D-48407 Rheine
F o o t f l a n g e
m o u n t i n g i n s t r u c t i o n s
KTR-N
sheet:
edition:
41011 E
1
2
Gezeichnet:
07.07.04 Sha/Bet
Ersatz für:
KTR-N vom 03.01.02
Schutzvermerk
ISO 16016 beachten.
Geprüft:
07.07.04 Sha
Ersetzt durch:
Foot flanges
serve as supporting element for the combination electro motor without foot in connection
with bellhousing and hydraulic pump.
General Hints
Please read through these mounting instructions carefully before you assemble the foot flange. Please
pay special attention to the safety instructions!
The mounting instructions are part of your product. Please keep them carefully and close to the foot
flange.
The copyright for these mounting instructions remains with
KTR
Kupplungstechnik GmbH.
Safety and Advice Hints
STOP
D A N G E R !
Danger of injury to persons.
!
C A U T I O N !
Damages on the machine possible.
A T T E N T I O N !
Pointing to important items.
General Hints to Danger
STOP
D A N G E R !
With assembly and disassembly of the foot flange it has to be made sure that the
entire drive train is protected against unintentional engagement. You can be
seriously hurt by rotating parts. Please make absolutely sure to read through and
observe the following safety instructions.
•
All operations on and with the foot flange have to be performed taking into account "safety first".
•
Please make sure to disengage the power pack before you perform your work at the foot flange.
•
Protect the power pack against unintentional engagement, e. g. by providing hints at the place of
engagement or removing the fuse for current supply.
•
Do not touch the operation area of the machine as long as it is in operation.
•
Please protect the rotating drive parts against unintentional touch. Please provide for the necessary
protection devices and caps.
Proper Use
You may only assemble and disassemble the foot flange if you
•
have carefully read through the mounting instructions and understood them
•
and if you are authorized and have proper skills
The foot flange ring may only be used in accordance with the technical data (see hydraulic
components catalogue). Unauthorized modifications on the foot flange design are not admissible. We
do not take any warranty for resulting damages. To further develop the product we reserve the right for
technical modifications.
The
foot flange
described in here corresponds to the technical status at the time of printing of these
mounting instructions.
