RADEX
®
-N
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
47110 EN
31 of 31
24
Please observe protection
note ISO 16016.
Drawn:
2019-07-23 Pz/Wb
Replacing:
KTR-N dated 2018-07-17
Verified:
2019-07-26 Pz
Replaced by:
EU Certificate of conformity
corresponding to EU directive 2014/34/EU dated 26 February 2014 and to the legal regulations
The manufacturer - KTR Systems GmbH, D-48432 Rheine - states that the
RADEX
®
-N Steel Lamina Couplings
in an explosion-proof design described in these operating/assembly instructions are devices
corresponding to article 2, 1. of directive 2014/34/EU and comply with the general safety and health
requirements according to enclosure II of directive 2014/34/EU.
The coupling described in here complies with the specifications of the following standards/rules:
DIN EN ISO 80079-36
DIN EN ISO 80079-37
DIN EN ISO 80079-38
IEC/TS 60079-32-1
The RADEX
®
-N is in accordance with the specifications of the directive 2014/34/EU.
According to article 13 (1) b) ii) of directive 2014/34/EU the technical documentation is deposited with
the notified body (type examination certificate IBExU02ATEXB005_05 X):
IBExU
Institut für Sicherheitstechnik GmbH
Identification number: 0637
Fuchsmühlenweg 7
09599 Freiberg
Rheine,
2018-11-28
i. V.
i. V.
Place
Date
Reinhard Wibbeling
Engineering/R&D
Reiner Banemann
Product Manager
10
Enclosure A
Advice and instructions regarding the use in
potentially explosive atmospheres
10.4 EU Certificate of conformity
