NVT-E
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
42611 EN
11 of 27
4
Please observe protection
note ISO 16016.
Drawn:
2019-12-06 Pz/Bet
Replacing:
KTR-N dated 2019-02-14
Verified:
2019-12-06 Pz
Replaced by:
The amendment of assignment of the switching outputs is described here based on the example of switching
output 1.
Reassign OUTX
reassign OX
r )ou_
oi l - t emp
Parameter
____
Basic ext. functions
Basic EF
b)EF
►
►
The switching outputs 1 to n can be assigned optionally to the measuring size of filling level or temperature. The
assignment affects the appearance of the menu
filling level
and
temperature
. In the factory setting
the switching output OUT 1 is assigned to the filling level.
Example: OUT 1 shall be assigned to temperature. For that purpose
must be set to
. As a result
the setting menu
is shifted from the menu
filling level
to the menu
temperature
. The procedure
for amending the settings does not change.
With reassignment of the switching outputs all corresponding settings have to be verified.
The figures set before are not automatically adapted. The assignment of LEDs for status
display does not change.
The following menu items are available:
Measurement of filling level
Measurement of temperature
The other switching outputs for measurement of filling level of temperature are assigned in
the same way as switching output 1.
Perform the same steps as described for switching output OUT 1.
Depending on the application the updating rate of the dispay can be set. The display can be fully switched off as
well. The function of LED continues to be operative.
Display refresh rate
Display Rate
di s
FASt - oFF
Parameter
____
Basic ext. functions
Basic EF
b)EF
►
►
The following menu items are available:
fast
medium
slow
display off
Please note:
•
Error messages continue to be displayed in spite of the display being switched
off.
4
Operation
4.6 Amendment of basic settings
4.6.3 Reassignment of switching outputs
4.6.4 Setting updating rate of display
