KTM rc8 r Owner'S Manual Download

Page: 163 / 272

SERVICE WORK ON THE CHASSIS

161

11.11

Checking for chain dirt

400678-01

–

Check the chain for loose dirt.
» If the chain is very dirty:

–

Clean the chain. (

p. 161)

11.12

Cleaning the chain

Warning

Danger of accidents

Oil or grease on the tires reduces their grip.

–

Remove oil and grease with a suitable cleaning material.

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Summary of Contents for rc8 r

















































































































































































































































































Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands

KTM rc8 r, Owner'S Manual

Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands