KTM RC 125 2016, Setup Instructions

Page: 8 / 18

3 WORK
6
–
Check that the passenger seat is correctly mounted.
Finishing work
–
Mount the front rider's seat. ( p. 5)
3.5 Removing the battery cover
Preparatory work
–
Remove the front rider's seat. ( p. 5)
L02144-10
Main work
–
Pull loop

toward the rear.
–
Pull battery cover

forward and remove toward the top.
3.6 Mounting the battery cover
L02141-10
Main work
–
Position battery cover

and pull toward the rear.
The battery cover engages with an audible click.
–
Check the battery cover is seated correctly.
Finishing work
–
Mount the front rider's seat. ( p. 5)
3.7 Removing the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Preparatory work
–
Switch off the ignition by turning the ignition key to the position .
–
Remove the front rider's seat. ( p. 5)
–
Remove the battery cover. ( p. 6)