KTM Freeride E-XC NG 2018, Owner'S Manual

Page: 108 / 151

16 ELECTRICAL SYSTEM
106
16.11 Changing the combination instrument
Preparatory work
–
Deactivate the vehicle. ( p. 43)
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. ( p. 107)
–
Mount the covering cap. ( p. 71)
–
Remove the headlight mask with the headlight. ( p. 101)
A00198-10
Main work
–
Remove screws
1
.
–
Pull the combination instrument upward out of the holder.
A00199-10
–
Using a coin, turn protection cap
2
all the way counterclock-
wise and remove it.
–
Remove combination instrument 3 .
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2430) ( p. 133)
–
Check the O-ring of the protection cap for correct seating.
E01033-10
–
Position protection cap
2
and turn all the way clockwise
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Install the headlight mask with the headlight. ( p. 102)
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)
–
Check the headlight setting. ( p. 105)
–
Adjust the combination instrument.