KTM Freeride E-XC 2018, Owner'S Manual

Page: 78 / 146

13 BRAKE SYSTEM
76
A00158-10
Main work
–
Move the brake fluid reservoir attached to the right of the han-
dlebar to a horizontal position.
–
Remove screws 1 .
–
Remove cover 2 with membrane 3 .
–
Add brake fluid to level
A
.
Guideline
Level A (brake fluid level
below reservoir rim)
5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( p. 132)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)
13.6 Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
A00129-10
–
Check the brake linings for lining thickness
A
.
Minimum thickness
A
≥
1 mm (
≥
0.04 in)
» If the minimum thickness is less than specified:
–
Change the front brake linings. ( p. 76)
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the front brake linings. ( p. 76)
13.7 Changing the front brake linings
Warning
Danger of accidents
Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)