KTM Freeride 350, Owner'S Manual

Page: 91 / 113

CLEANING, CARE
89
17.1
Cleaning the motorcycle
Note
Material damage Damage and destruction of components by high-pressure cleaning equipment.
–
Never clean the vehicle with high-pressure cleaning equipment or a strong water-jet. The excessive pressure can penetrate electri-
cal components, socket connects, throttle cables, and bearings, etc., and can damage or destroy these parts.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
If you clean the motorcycle regularly, its value and appearance will be maintained over a long period.
Avoid direct sunshine on the motorcycle during cleaning.
401061-01
–
Close off the exhaust system to keep water from entering.
–
First remove coarse dirt particles with a gentle spray of water.
–
Spray very dirty areas with a normal motorcycle cleaner and then clean with a
paintbrush.
Motorcycle cleaner ( p. 105)
Info
Use warm water containing normal motorcycle cleaner and a soft sponge.
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride a short distance until the engine reaches operating tempera-
ture.
Info
The heat produced causes water at inaccessible locations in the engine and
on the brake system to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 51)
–
Treat bare metal parts (except for the brake discs and exhaust system) with anti-
corrosion materials.
Cleaning and preserving materials for metal, rubber and plastic ( p. 105)
–
Treat all plastic parts and powder-coated parts with a mild cleaning and care prod-
uct.
Paint cleaner and polish for high-gloss and matte finishes, bare metal and plastic
surfaces (
p. 106)
–
Oil the steering lock.
Universal oil spray ( p. 106)