KTM Freeride 350, Owner'S Manual

Page: 79 / 113

ELECTRICAL SYSTEM
77
B01041-11
–
Position the headlight mask and fix it with the rubber band
3
.
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and wiring harness
4
.
Subsequent work
–
Check the headlight setting. ( p. 78)
13.8
Changing the headlight bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preliminary work
–
Remove the headlight mask with the headlight. ( p. 76)
B01113-10
Main work
–
Turn rubber cap
1
together with the underlying bulb socket counterclockwise all
the way and remove it.
–
Pull bulb socket
2
of the parking light out of the reflector.
100862-10
–
Press headlight bulb
3
lightly into the bulb socket, turn it counterclockwise, and
pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) ( p. 98)
–
Insert the rubber cap with the bulb socket into the reflector and turn it clockwise
all the way.
Info
Ensure that O-ring
4
is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Follow-up work
–
Refit the headlight mask with the headlight. ( p. 76)
–
Check the headlight setting. ( p. 78)