KTM Freeride 350, Owner'S Manual

Page: 52 / 113

SERVICE WORK ON THE CHASSIS
50
B01077-11
–
Position the fuel tank.
–
Position the intake flange on the throttle valve body.
–
Tighten hose clamp
2
.
B01076-11
–
Plug in connector
3
.
–
Position engine breather hose
4
.
B01075-11
–
Mount and tighten screws
5
on both sides.
Guideline
Screw, fuel tank M8 15 Nm
(11.1 lbf ft)
–
Mount and tighten screw
6
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Mount the fuel tank breather.
B01079-10
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve.
–
Remove the wash cap set. Lubricate the O-ring and connect plug-in connection
7
of the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
Subsequent work
–
Lock the seat. ( p. 45)
10.30
Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 51)