KTM Freeride 350, Owner'S Manual

Page: 41 / 113

SERVICE WORK ON THE CHASSIS
39
B01054-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 22 Nm
(16.2 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple clamp M8 18 Nm
(13.3 lbf ft)
B01105-11
–
Position brake caliper, and mount and tighten screws
4
.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount cable binder
5
.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
6
.
Subsequent work
–
Install the front wheel.
x
( p. 68)
–
Refit the headlight mask with the headlight. ( p. 76)
–
Check the headlight setting. ( p. 78)
10.7
Removing the fork protector
x
B01039-10
–
Remove screws
1
. Take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork protector.
B01040-10
–
Remove screws
3
on the right fork leg. Take off the fork protector.
10.8
Installing the fork protector
x
B01040-11
–
Position the fork protection on the right fork leg. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)