TUNING THE CHASSIS
35
B01033-10
–
Remove protection caps
1
.
–
Turn adjusting screws
2
clockwise all the way.
Info
Adjusting screws
2
are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort
25 clicks
Standard
20 clicks
Sport
15 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection covers
1
.
9.13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
B01034-10
–
Turn adjusting screws
1
clockwise all the way.
Info
Adjusting screws
1
are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
Comfort
25 clicks
Standard
20 clicks
Sport
15 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
9.14
Handlebar position
0
0
B01035-10
On the upper triple clamp, there are two holes at a distance of
A
to each other.
Hole distance
A
15 mm (0.59 in)
The holes on the handlebar supports are placed at a distance of
B
from the center.
Hole distance
B
3.5 mm (0.138 in)
The handlebar supports can be mounted in four different positions.
Summary of Contents for Freeride 350
Page 1: ...OWNER S MANUAL 2012 Freeride 350 Art no 3211720en...
Page 2: ......
