KTM Freeride 350 2013, Owner'S Manual, Page: 41 / 113

12 SERVICE WORK ON THE CHASSIS
39
12.6 Installing the fork legs
x
602803-10
Main work
–
Position the fork legs.
Info
The lowest milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
1
toward the front.
B01054-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 22 Nm
(16.2 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple clamp M8 18 Nm
(13.3 lbf ft)
602805-11
–
Position brake caliper, and mount and tighten screws
4
.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft)
Loctite ® 243™
–
Mount cable binder
5
.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
6
.
Finishing work
–
Install the front wheel.
x
( p. 70)
–
Refit the headlight mask with the headlight. ( p. 78)
–
Check the headlight setting. ( p. 80)
12.7 Removing the fork protector
x
B01039-10
–
Remove screws
1
. Take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork protector.
B01040-10
–
Remove screws
3
on the right fork leg. Take off the fork protector.