KTM Freeride 350 2012, Setup Instructions

Page: 15 / 22

4 SERVICE WORK ON THE CHASSIS
13
4.8 Installing the battery
B01104-10
–
Connect the positive cable.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
–
Attach negative cable.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
Battery (YTX4L-BS)
Info
Contact disk
A
must be mounted between screw
1
and cable socket
2
with the claws facing down.
–
Slide positive terminal cover
3
over the positive terminal.
B01102-11
–
Position the battery in the battery compartment.
–
Attach fixing flap
4
.
–
Mount and tighten screw
5
.
4.9 Installing the front fender
B01030-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the headlight mask.
4.10 Refitting the headlight mask with the headlight
B01169-12
Main work
–
Insert bulb socket
1
into the high beam indicator lamp.
–
Plug in connector.