SETUP 2
5
E02431-10
–
Position the cables for the right-hand controls and secure with
cable ties.
–
Attach the clutch line to the holder.
E02432-01
–
Preassemble the hand guards with screws and bushings.
E02433-10
–
Position the right hand guard.
–
Mount and tighten the rear mirror.
–
Tighten screw
1
.
Guideline
Screw, handle bar
end hand guard
M8x40
25 Nm (18.4 lbf ft)
–
Repeat these steps on the opposite side.
–
Carefully loosen and remove the tension belt from the rear
wheel spindle.
Guideline
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
