KTM F9903QE, Setup Instructions

Page: 7 / 19

2 SETUP
5
E00282-10
(Super Duke GT US)
–
Bond the reflectors on the right and left side of the reflector holder.
–
Mount the reflector holder on license plate holder 9 .
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
E00273-01
–
Remove the passenger seat. ( p. 7)
–
Remove spare key and KEYCODECARD and keep in a safe place for the handover.
–
Secure the tool set with the rubber holder.
E00274-01
–
Carefully loosen and remove the tension belt from the frame.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the fork legs.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.
–
Remove the radiator shield.
S01188-10
–
Position the front spoiler. Mount and tighten screws
bk
with the washers.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
S01189-10
–
Position metal sheets on the left and right. Mount and tighten screws bl .
Guideline
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
E00280-10
–
Remove the front rider's seat. ( p. 7)
–
Plug in the connector of starter relay bm .
(Super Duke GT US)
–
Mount the side cases.
Info
Observe the accompanying fitting instructions.
–
Recharge the battery. ( p. 8)
–
Remove the protective plastic.
–
Refuel. ( p. 10)