KTM F9903Q4, Setup Instructions

Page: 8 / 19

3 WORK
6
3.1 Installing the engine guard
V00726-10
–
Position engine guard
1
, mount screws
2
with bushings and tighten.
Guideline
Screw, engine guard M6 10 Nm (7.4 lbf ft)
3.2 Removing the passenger seat
H02100-10
–
Insert the Race
‑
on key or the black ignition key into the seat lock
1
and turn
clockwise.
–
Raise front of the passenger seat, pull toward the fuel tank, and remove upward.
–
Remove the key.
3.3 Mounting the passenger seat
401680-11
–
Attach the hooks on the passenger seat
1
to the hanger on the subframe.
Info
Ensure that the seat heating cable is correctly routed.
–
Lower passenger seat and push back at the same time.
–
Position locking pin
2
in lock housing and press passenger seat forward until the
locking pin engages with an audible click.
–
Check that the passenger seat is correctly mounted.
3.4 Removing the front rider's seat
Preparatory work
–
Remove the passenger seat. ( p. 6)
0 0 A A
M00856-10
Main work
–
Lift the rider's seat back and unhook in the A area.