KTM F9903Q2, Setup Instructions

Page: 10 / 20

3 WORK
8
L01484-10
Main work
–
Fold up cover
1
.
–
Place battery
2
in the battery compartment.
Battery (YTX14-BS)
L01483-11
–
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
–
Mount positive terminal cover 3 .
–
Position negative cable
4
; mount and tighten the screw.
Guideline
Screw, battery terminal M6 4.5 Nm
(3.32 lbf ft)
L01486-10
–
Position cover 1 .
Screw heads
A
engage in recesses
B
.
–
Mount and tighten screw
5
.
Finishing work
–
Mount the front rider's seat. ( p. 6)
–
Mount the passenger seat. ( p. 6)
–
Set the time and date.
3.7 Disconnecting the negative (minus) cable of the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the battery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and battery gases get into
the eyes.