WORK 3
23
E00881-11
–
Mount and tighten screws
2
with the collar bushings.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
S03486-10
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
3
.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Attach fuel tank breather hose
4
.
–
Plug in connector
5
for the fuel pump.
Finishing work
–
Mount the seat. (
3.7
Checking the throttle cable routing
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank. (
