WORK 3
31
E00357-11
(All XC
‑
W models)
–
Connect plug-in connector
1
.
E00899-11
–
Position the headlight mask and fix it with rubber bands
2
.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
Finishing work
–
Check the headlight setting. (
3.17
Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle vertically at a distance
A
away from the
wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
